VDAOvideo

Installing a SCOP 5 Heat Pump in My House - Design, Install & Monitoring

Glyn Hudson · 96.1K views · 11 months ago
Safety check pending
Description

See live monitoring data from this system on HeatPumpMonitor.org: https://heatpumpmonitor.org/dashboard?id=748 In this video I document my installation of a heat pump in a 1979 Bungalow. While I am not a professional installer, I used data from OpenEnergyMonitor to guide my design which replaced an old oil boiler with an air source heat pump. My home is a 140m² bungalow built in 1979 with cavity wall insulation. To ensure accurate sizing, I performed a blower door test which measured 0.4 Air Changes per Hour (ACH). Using a conservative 0.6 ACH figure, I calculated a heat loss of 5.6kW at -2°C. (Had I used standard default assumptions, this would have been overestimated at 8.4kW). Flow Temperature: To achieve a target SCOP of 4+, I designed the system to run at a low flow temperature of

Recommended on forums