Capacity Testing LFP Cells from an old EV (Lithium Batteries)
Description
I recently pulled LFP (lithium iron phosphate) cells from an old EV. The car was converted 8 or 9 years ago and the cells were in rough shape. Most of the cells were below 1.0 volt! That's not good. For the past month I have been very slowly charging each cell. I used a buck converter from a 12v battery to charge the dead cells one at a time. I used constant current of 0.1 amp. This took a long time. Once all the cells were at 2.5 volts I then paralleled the cells and finished charging to about 3.3 volts. My goal was roughly 80% capacity. In this video I'm utilizing an iCharger X8 to do a capacity test. This means setting up the iCharger into "regen" mode, which allows for 30 amp discharge. If you want more info on how to set up this mode I recommend checking out this video f
10:10Battleborn Batteries Responds! Their Overheating Device is a "Feature" not a "Problem"??DIY Solar Power with Will Prowse268K views
16:23Current Monitor/Shunt - Launch Video - diyBMSStuart Pittaway7.1K views
16:57How to Make a 52V 20Ah Triangle Battery with 18650 CellsEbikeSchool.com347K views
11:291kw DIY PowerWall affordable 18650 build project (2018)jehugarcia649K views
36:11How to MAKE a LITHIUM ION Battery Pack for an Electric Motorcycle (No explosions, sorry)The Inja338K views
20:56Sorting Cells into Equal Packs for Next 14s Build!!!AVERAGE JOE4.4K views
7:34Plant Battery (Microbial Fuel Cell)Robert Murray-Smith21.3K views
4:0918650 DIY Powerwall Built from used laptop batteries ⚡HBPowerwall182K views
46:02Supercapacitor Conversion of a Tripp-Lite UPSMark Furneaux39.8K views
12:47Recharging your battery bank without solarDavidPoz90.1K views
9:24LiFePO4 Longevity Discussion! Why Charge to 100%?! For Solar??DIY Solar Power with Will Prowse368K views
8:45DIY Rugged OffGrid Power Pack w/GlytchHak536.3K views
11:51DIYBMS V4 IntroductionStuart Pittaway42.5K views
26:58Simplest solar light possible, using old phone battery.bigclivedotcom507K views